Hawaii 1.5"

Shipping Based On Order Size & Value

Prices calculated at checkout based on total order values excluding tax.
Combined orders containing products from both shipping size groups will be charged at freight prices.


 

We aim to despatch your order the same day if received online before midday.
Tracking details will be emailed upon dispatch of your order.

Decking and Temporary Use

Loose Lay

Lay the artificial grass out and trim to size.  It will stay nice and flat by its own weight on any flat even surface.  Place a plant pot/garden ornament on the corners it hold it down in areas that are exposed to strong winds.

Self Adhesive Tape

Lay and cut the artificial grass as above but instead of leaving it loose, use our Self Adhesive Seaming Tape to stick it to any clean smooth surface.  This will prevent strong winds lifting the corners of the artificial grass.

Decking

If the surface to be covered will accommodate stapling such as exterior ply or decking use a staple gun or tack/nail it directly to the wood. This will prevent strong winds lifting the corners of the grass.  Gaps between decking boards may show as lines on the surface of shorter pile artificial grass. 
 

Concrete/ Patio Base

Preparation

Make sure that the surface to be covered is clean and smooth ready to receive the artificial grass. A self levelling compound available from any DIY store can remove surface imperfections that may show through to the top surface especially on thinner pile height products. 

Acclimatising

Lay the artificial grass on to the clean/level area to be covered. Allow approximately 2"of artificial grass to trim off to make that perfect edge ie in doorways or up a wall. Leave for around 1 to 2 days to settle. This helps stop any wrinkling or creasing occuring.

Trimming

Cut and trim your artificial grass, using a sharp utility knife making sure their are no gaps between walls and grass.  Always use sharp blades and change the blade every 1-2 yards

Joining

Make the seams using our Self Adhesive Tape to give strong weather resistant bonds.

Soil / Sand Bases

Preparation

You should compact the ground, using a vibrating plate which can be hired at an equipment hire centre but for smaller areas something as simple as the back of a shovel will do

Acclimatising

Lay the artificial grass on top of the sand/soil (as opposed to dragging it onto the base material). Allow approximately 2" of artificial grass to trim off to make that perfect edge ie in doorways or up a wall. Leave for around 1 to 2 days to settle. This helps stop any wrinkling or creasing occuring.

Trimming

Cut and trim your artificial grass, using a sharp utility knife making sure their are no gaps between walls and grass. Always use sharp blades and change the blade every 1-2 yards

Joining

For best results use our Self Adhesive Tape this will give you a sports grade joins between sections of artificial grass on any surface.  Alternatively you can bury a length of treated timber into the ground and staple/tack/nail the edges directly to it.